VisionX Solution Library
Every solution in the VisionX library, each a full 15-minute deep-dive: what it detects, the AI primitive, camera placement, alert tier, thresholds, failure modes, and exclusions.
Modules in this track
01PPE-HELMET — Hard Hat / Helmet Compliance
Worker Safety & PPE: detects a worker in a helmet-required zone whose head has no hard hat
PPE-VEST — Hi-Vis Vest Compliance
Worker Safety & PPE: detects a person in the zone not wearing a high-visibility vest
PPE-GLOVE — Gloves Compliance
Worker Safety & PPE: detects bare hands during a task that requires gloves
PPE-GOGGLE — Safety Goggles / Face Shield
Worker Safety & PPE: detects eye protection absent during an eye-hazard task
PPE-HARNESS — Fall-Arrest Harness at Height
Worker Safety & PPE: detects a worker at height or on a platform without a fastened harness
PPE-MANDOWN — Man-Down / Fall Detection
Worker Safety & PPE: detects a person who has fallen and remains prone/immobile
PPE-POSTURE — Unsafe Posture / Ergonomic Advisory
Worker Safety & PPE: detects sustained unsafe lifting or twisting posture
ACC-UNAUTH — Unauthorised Zone Entry
Access & Zone Safety: detects a person entering a restricted zone without authorisation
ACC-TAILGATE — Tailgating / Piggybacking
Access & Zone Safety: detects a second person following an authorised entry on one credential
ACC-BREACH — Restricted-Area Breach
Access & Zone Safety: detects presence in a hard-restricted area at any time
ACC-LONE — Lone-Worker Monitoring
Access & Zone Safety: detects a single worker alone in a buddy-required zone
ACC-SPOOF — Spoof / Presentation-Attack Detection
Access & Zone Safety: detects a photo/mask/video used to defeat face-based access
VEH-FORKTYPE — Forklift Type Validation
Vehicle & Mobile Equipment: detects a wrong-capacity forklift entering a capacity-restricted bay (e.g. a 3-ton forklift in a 5-ton-only bay)
VEH-SPEED — Forklift Over-Speed
Vehicle & Mobile Equipment: detects a forklift exceeding the zone speed limit
VEH-PROX — Pedestrian-Vehicle Proximity
Vehicle & Mobile Equipment: detects a person too close to a moving forklift/vehicle
VEH-DOCK — Dock / Loading-Bay Safety
Vehicle & Mobile Equipment: detects unsafe conditions at the dock (person in the drive path, missing chock) [CONFIRM]
VEH-PARK — Parking / Staging Compliance
Vehicle & Mobile Equipment: detects a vehicle parked outside its designated staging area or blocking a route
FGS-SMOKE — Smoke / Flame Detection
Fire, Gas & Spill: detects visible smoke or flame in the monitored area
FGS-LEAK — Leak / Spill Identification
Fire, Gas & Spill: detects a liquid spill or pooling on the floor
FGS-EXIT — Blocked Fire Exit / Egress
Fire, Gas & Spill: detects an obstruction blocking a fire exit or egress route
PRQ-ASSEMBLY — Assembly / Sequence Verification
Process & Quality: detects a missed or out-of-order assembly step (e.g. a skipped bolt)
PRQ-TACKLE — Tackle / Fixture Presence
Process & Quality: detects a required tackle, fixture, or securing component missing from the unit
PRQ-SURFACE — Paint / Surface Inspection
Process & Quality: detects visible surface defects (scratch, run, blemish) [CONFIRM scope]
PRQ-FOREIGN — Foreign-Body / Empty-Box Check
Process & Quality: detects a foreign object inside a crate that should be empty
PRQ-FILL — Fill-Level / Count Check
Process & Quality: detects an incorrect fill level or item count in a container
MAT-STRAP — Strap / Securing Check
Material & Logistics: detects a load missing its required strap or securing
MAT-TILT — Tilt / Alignment Check
Material & Logistics: detects a load or stack tilted beyond the safe angle
MAT-LOAD — Load Integrity
Material & Logistics: detects a compromised or shifting load (fallen item, broken stack)
LOG-KIT — Kit Verification (LOG-KIT)
Material & Logistics: detects an incomplete or wrong kit at the pick/pack station
LOG-ZONE — Zone Occupancy / Put-Away (LOG-ZONE)
Material & Logistics: detects stock placed in the wrong storage zone, or an over/under-occupied zone
LOG-COUNT — Item / Case Count (LOG-COUNT)
Material & Logistics: detects a miscount of cases/items at a count point
ENU-PERIM — Perimeter Intrusion (Utilities)
Energy & Utilities: detects an intruder crossing a facility perimeter
ENU-EQUIP — Equipment / Asset Monitoring
Energy & Utilities: detects an abnormal state at monitored equipment (e.g. person in an exclusion radius, visible abnormal condition) [CONFIRM scope]
ENU-SUBSTATION — Substation Safety
Energy & Utilities: detects unauthorised presence or unsafe approach within a substation
HVY-HOTZONE — Hot-Zone / Exclusion Entry
Heavy Industry: detects a person entering a hot or hazardous exclusion zone
HVY-CRANE — Crane / Load-Path Safety
Heavy Industry: detects a person under a suspended load or in the crane path
HVY-CONVEYOR — Conveyor Safety
Heavy Industry: detects an unsafe interaction with a conveyor (person too close, reach-in)
SEC-INTRUDE — Intrusion Detection
Security & Surveillance: detects an intruder in a monitored area outside permitted hours
SEC-LOITER — Loitering Detection
Security & Surveillance: detects a person dwelling in an area beyond a normal time
SEC-ABANDON — Abandoned Object
Security & Surveillance: detects an object left unattended beyond a threshold time
SEC-CROWD — Crowd Density
Security & Surveillance: detects occupancy exceeding a safe density in an area
SEC-TAMPER — Camera Tamper / Obstruction
Security & Surveillance: detects a camera being blocked, defocused, or moved